Medical calculator
Serum Osmolality Calculator
Serum osmolality estimates the concentration of dissolved particles in the blood. It helps assess hydration, hyperglycaemia and suspected poisoning.
Estimate serum osmolality
Lab values
Enter sodium, glucose and BUN to estimate serum osmolality.
What this calculator does
This is the calculated osmolality using sodium, glucose and blood urea nitrogen. A measured osmolality is performed in the laboratory; the difference between measured and calculated values can be clinically important.
How to use the calculator
- Enter sodium in mmol/L.
- Enter glucose in mg/dL.
- Enter BUN in mg/dL; multiply urea in mmol/L by 2.8 to convert.
- Select Calculate to see the estimated osmolality.
Formula
All values in the units shown
| Variable | Meaning |
|---|---|
| Sodium | Main determinant of serum osmolality. |
| Glucose | Divided by 18 to convert mg/dL to mmol/L. |
| BUN | Divided by 2.8 to convert mg/dL to mmol/L. |
Example calculation
Sodium 140 mmol/L, glucose 100 mg/dL and BUN 15 mg/dL give 280 + 5.6 + 5.4 = 291 mOsm/kg, within the usual reference range.
Understanding your result
- A value within about 275–295 mOsm/kg is typical.
- High values suggest dehydration or hyperglycaemia.
- Low values suggest overhydration or hyponatraemia.
- A measured-minus-calculated gap can signal unmeasured solutes.
Factors that affect the result
- Glucose and BUN change rapidly with treatment.
- Mannitol, alcohol and other solutes are not captured.
- Laboratory methods differ slightly.
- Sample handling affects measured values.
Limitations
- This is a calculated estimate, not a measurement.
- It cannot detect toxins without an osmolal gap.
- It does not replace clinical assessment of volume status.
- It is not a treatment guide for fluid or sodium disorders.
Frequently asked questions
What is a normal serum osmolality?
Many laboratories use about 275–295 mOsm/kg, but reference ranges vary.
What is the osmolal gap?
It is measured osmolality minus calculated osmolality. A raised gap can indicate unmeasured solutes such as alcohols or mannitol.
Can I calculate osmolality from urea instead of BUN?
Yes if you convert units correctly; this calculator uses BUN in mg/dL.
Why is sodium multiplied by two?
Sodium and its accompanying anions are the main contributors, so the formula doubles sodium as an approximation.
References
- Purssell RA, Pudek M, Brubacher J, Abu-Laban RB. Derivation and validation of a formula to calculate the contribution of ethanol to the osmolal gap. Ann Emerg Med. 2001;38(6):653–659.
Related calculators
For education only. Sodium and fluid disorders can be life-threatening. Seek clinical guidance before changing fluids, sodium or medications.
Reviewed November 2026. Educational content, not a clinical record.